|
80
Return to product listing
General
The Teletech TX180 Multi-Line Identifier is a highly
practical network installation and maintenance tool, used to rapidly
identify all pairs in a multi-pair cable.
It can be used to identify and
map all pairs in a new cable installation or to identify cable pairs
for re-jointing large cables. It consists of a Mass Termination
Multiplexer (MTM) and Hand-held Read-out Device (HRD), which are
usually connected at opposite ends of a multi-pair cable. The Mass
Termination Multiplexer can connect to 100 customer lines or more.
By the use of termination adapters the MTM can connect to many exchange
MDF and Street Cabinet terminals.
Connection of the Mass Termination Multiplexer is
non-intrusive, that is, it does not in any way affect the pairs
connected. If a line is in use the telephone call will not be interrupted.
The Hand-held Read-out Device has an easily readable display and
a pair of test leads to connect to the pair to be identified. The
Display quickly shows the identity of the pair once the test leads
are connected. The system operates under any circumstances where
a normal telephone service will operate.
Function
The TX180 Multi-Line
Identifier is ideal for quickly and accurately checking cabling
within buildings between each telephone socket and the Distribution
Frame. It is also ideally suited to identifying pairs when repairing
a cable damaged by mechanical digging equipment etc. By using two
Mass Termination Multiplexers, each end of the cable can be quickly
identified, saving hours on the normal repair time. The TX180 can
even identify split pairs at the cable break using a unique positive
identification method and fast scanning technique.
Features
Mass Termination Multiplexer
a) Battery operated, using rechargeable cells.
A fully charged battery will operate for 60 hours normal use.
b) A mains operated battery charger is provided that recharges the
battery in less than 4 hours.
c) The Mass Termination Multiplexer consists of two parts (i) a
Controller part and (ii) a Access Unit part that can be changed
to suit various connectors.
d) The Controller can connect to two Connector units for connection
to 50 lines or more simultaneously.
e) Capable of operating in all conditions encountered with pairs
connected to the customer network.
f) An LED indicated that MTM is ON and also indicates low Battery
Voltage.
g) Access Units are available for most telecommunication cable connectors.
Hand-held Read-out Device
a) Light and portable plastic splash proof casing.
b) Pair number is displayed within 3 seconds of connection of test
leads to a cable pair.
c) The clear LCD display, which can be read in sunlight, indicates
pair identification and battery status of both MTM and HRD.
d) Test leads are highly flexible with crocodile clips on the end
connecting to the cable pair and 4mm terminals to connect to the
HRD.
e) Test leads can be used with terminations for telephone connectors
(RJ6 or RJ45).
f) The Power switch has an automatic time-out after no activity
to prevent battery drain.
g) Battery: Alkaline, 9V PP3.
Technical
| Operating Temperature |
0 to 50 C |
| Storage Temperature: |
-10 to +60 C |
| Humidity: |
0-90 % non-condensing |
The TX180 can even identify split pairs at the cable
break using a unique positive identification method and fast scanning
technique.
Return
to product listing
|
